ACPI WMI interface¶
The ACPI WMI interface is a proprietary extension of the ACPI specification made by Microsoft to allow hardware vendors to embed WMI (Windows Management Instrumentation) objects inside their ACPI firmware. Typical functions implemented over ACPI WMI are hotkey events on modern notebooks and configuration of BIOS options.
PNP0C14 ACPI device¶
Discovery of WMI objects is handled by defining ACPI devices with a PNP ID
of PNP0C14. These devices will contain a set of ACPI buffers and methods
used for mapping and execution of WMI methods and/or queries. If there exist
multiple of such devices, then each device is required to have a
unique ACPI UID.
_WDG buffer¶
The _WDG buffer is used to discover WMI objects and is required to be
static. Its internal structure consists of data blocks with a size of 20 bytes,
containing the following data:
Offset |
Size (in bytes) |
Content |
|---|---|---|
0x00 |
16 |
128 bit Variant 2 object GUID. |
0x10 |
2 |
2 character method ID or single byte notification ID. |
0x12 |
1 |
Object instance count. |
0x13 |
1 |
Object flags. |
The WMI object flags control whether the method or notification ID is used:
0x1: Data block usage is expensive and must be explicitly enabled/disabled.
0x2: Data block contains WMI methods.
0x4: Data block contains ASCIZ string.
0x8: Data block describes a WMI event, use notification ID instead of method ID.
Each WMI object GUID can appear multiple times inside a system. The method/notification ID is used to construct the ACPI method names used for interacting with the WMI object.
WQxx ACPI methods¶
If a data block does not contain WMI methods, then its content can be retrieved by this required ACPI method. The last two characters of the ACPI method name are the method ID of the data block to query. Their single parameter is an integer describing the instance which should be queried. This parameter can be omitted if the data block contains only a single instance.
WSxx ACPI methods¶
Similar to the WQxx ACPI methods, except that it is optional and takes an
additional buffer as its second argument. The instance argument also cannot
be omitted.
WMxx ACPI methods¶
Used for executing WMI methods associated with a data block. The last two characters of the ACPI method name are the method ID of the data block containing the WMI methods. Their first parameter is a integer describing the instance which methods should be executed. The second parameter is an integer describing the WMI method ID to execute, and the third parameter is a buffer containing the WMI method parameters. If the data block is marked as containing an ASCIZ string, then this buffer should contain an ASCIZ string. The ACPI method will return the result of the executed WMI method.
WExx ACPI methods¶
Used for optionally enabling/disabling WMI events, the last two characters of the ACPI method are the notification ID of the data block describing the WMI event as hexadecimal value. Their first parameter is an integer with a value of 0 if the WMI event should be disabled, other values will enable the WMI event.
WCxx ACPI methods¶
Similar to the WExx ACPI methods, except that it controls data collection
instead of events and thus the last two characters of the ACPI method name are
the method ID of the data block to enable/disable.
_WED ACPI method¶
Used to retrieve additional WMI event data, its single parameter is a integer holding the notification ID of the event.