SMC Sysctl

/proc/sys/net/smc/* Variables

autocorking_size - INTEGER

Setting SMC auto corking size: SMC auto corking is like TCP auto corking from the application's perspective of view. When applications do consecutive small write()/sendmsg() system calls, we try to coalesce these small writes as much as possible, to lower total amount of CDC and RDMA Write been sent. autocorking_size limits the maximum corked bytes that can be sent to the under device in 1 single sending. If set to 0, the SMC auto corking is disabled. Applications can still use TCP_CORK for optimal behavior when they know how/when to uncork their sockets.

Default: 64K

smcr_buf_type - INTEGER

Controls which type of sndbufs and RMBs to use in later newly created SMC-R link group. Only for SMC-R.

Default: 0 (physically contiguous sndbufs and RMBs)

Possible values:

  • 0 - Use physically contiguous buffers

  • 1 - Use virtually contiguous buffers

  • 2 - Mixed use of the two types. Try physically contiguous buffers first. If not available, use virtually contiguous buffers then.

smcr_testlink_time - INTEGER

How frequently SMC-R link sends out TEST_LINK LLC messages to confirm viability, after the last activity of connections on it. Value 0 means disabling TEST_LINK.

Default: 30 seconds.

wmem - INTEGER

Initial size of send buffer used by SMC sockets. The default value inherits from net.ipv4.tcp_wmem[1].

The minimum value is 16KiB and there is no hard limit for max value, but only allowed 512KiB for SMC-R and 1MiB for SMC-D.

Default: 16K

rmem - INTEGER

Initial size of receive buffer (RMB) used by SMC sockets. The default value inherits from net.ipv4.tcp_rmem[1].

The minimum value is 16KiB and there is no hard limit for max value, but only allowed 512KiB for SMC-R and 1MiB for SMC-D.

Default: 128K