High Memory Handling

By: Peter Zijlstra <a.p.zijlstra@chello.nl>

What Is High Memory?

High memory (highmem) is used when the size of physical memory approaches or exceeds the maximum size of virtual memory. At that point it becomes impossible for the kernel to keep all of the available physical memory mapped at all times. This means the kernel needs to start using temporary mappings of the pieces of physical memory that it wants to access.

The part of (physical) memory not covered by a permanent mapping is what we refer to as 'highmem'. There are various architecture dependent constraints on where exactly that border lies.

In the i386 arch, for example, we choose to map the kernel into every process's VM space so that we don't have to pay the full TLB invalidation costs for kernel entry/exit. This means the available virtual memory space (4GiB on i386) has to be divided between user and kernel space.

The traditional split for architectures using this approach is 3:1, 3GiB for userspace and the top 1GiB for kernel space:

+--------+ 0xffffffff
| Kernel |
+--------+ 0xc0000000
|        |
| User   |
|        |
+--------+ 0x00000000

This means that the kernel can at most map 1GiB of physical memory at any one time, but because we need virtual address space for other things - including temporary maps to access the rest of the physical memory - the actual direct map will typically be less (usually around ~896MiB).

Other architectures that have mm context tagged TLBs can have separate kernel and user maps. Some hardware (like some ARMs), however, have limited virtual space when they use mm context tags.

Temporary Virtual Mappings

The kernel contains several ways of creating temporary mappings. The following list shows them in order of preference of use.

• kmap_local_page(), kmap_local_folio() - These functions are used to create short term mappings. They can be invoked from any context (including interrupts) but the mappings can only be used in the context which acquired them. The only differences between them consist in the first taking a pointer to a struct page and the second taking a pointer to struct folio and the byte offset within the folio which identifies the page.

  These functions should always be used, whereas kmap_atomic() and kmap() have been deprecated.

  These mappings are thread-local and CPU-local, meaning that the mapping can only be accessed from within this thread and the thread is bound to the CPU while the mapping is active. Although preemption is never disabled by this function, the CPU can not be unplugged from the system via CPU-hotplug until the mapping is disposed.

  It's valid to take pagefaults in a local kmap region, unless the context in which the local mapping is acquired does not allow it for other reasons.

  As said, pagefaults and preemption are never disabled. There is no need to disable preemption because, when context switches to a different task, the maps of the outgoing task are saved and those of the incoming one are restored.

  kmap_local_page(), as well as kmap_local_folio() always returns valid virtual kernel addresses and it is assumed that kunmap_local() will never fail.

  On CONFIG_HIGHMEM=n kernels and for low memory pages they return the virtual address of the direct mapping. Only real highmem pages are temporarily mapped. Therefore, users may call a plain page_address() for pages which are known to not come from ZONE_HIGHMEM. However, it is always safe to use kmap_local_{page,folio}() / kunmap_local().

  While they are significantly faster than kmap(), for the highmem case they come with restrictions about the pointers validity. Contrary to kmap() mappings, the local mappings are only valid in the context of the caller and cannot be handed to other contexts. This implies that users must be absolutely sure to keep the use of the return address local to the thread which mapped it.

  Most code can be designed to use thread local mappings. User should therefore try to design their code to avoid the use of kmap() by mapping pages in the same thread the address will be used and prefer kmap_local_page() or kmap_local_folio().

  Nesting kmap_local_page() and kmap_atomic() mappings is allowed to a certain extent (up to KMAP_TYPE_NR) but their invocations have to be strictly ordered because the map implementation is stack based. See kmap_local_page() kdocs (included in the "Functions" section) for details on how to manage nested mappings.

• kmap_atomic(). This function has been deprecated; use kmap_local_page().

  NOTE: Conversions to kmap_local_page() must take care to follow the mapping restrictions imposed on kmap_local_page(). Furthermore, the code between calls to kmap_atomic() and kunmap_atomic() may implicitly depend on the side effects of atomic mappings, i.e. disabling page faults or preemption, or both. In that case, explicit calls to pagefault_disable() or preempt_disable() or both must be made in conjunction with the use of kmap_local_page().

  [Legacy documentation]

  This permits a very short duration mapping of a single page. Since the mapping is restricted to the CPU that issued it, it performs well, but the issuing task is therefore required to stay on that CPU until it has finished, lest some other task displace its mappings.

  kmap_atomic() may also be used by interrupt contexts, since it does not sleep and the callers too may not sleep until after kunmap_atomic() is called.

  Each call of kmap_atomic() in the kernel creates a non-preemptible section and disable pagefaults. This could be a source of unwanted latency. Therefore users should prefer kmap_local_page() instead of kmap_atomic().

  It is assumed that k[un]map_atomic() won't fail.

• kmap(). This function has been deprecated; use kmap_local_page().

  NOTE: Conversions to kmap_local_page() must take care to follow the mapping restrictions imposed on kmap_local_page(). In particular, it is necessary to make sure that the kernel virtual memory pointer is only valid in the thread that obtained it.

  [Legacy documentation]

  This should be used to make short duration mapping of a single page with no restrictions on preemption or migration. It comes with an overhead as mapping space is restricted and protected by a global lock for synchronization. When mapping is no longer needed, the address that the page was mapped to must be released with kunmap().

  Mapping changes must be propagated across all the CPUs. kmap() also requires global TLB invalidation when the kmap's pool wraps and it might block when the mapping space is fully utilized until a slot becomes available. Therefore, kmap() is only callable from preemptible context.

  All the above work is necessary if a mapping must last for a relatively long time but the bulk of high-memory mappings in the kernel are short-lived and only used in one place. This means that the cost of kmap() is mostly wasted in such cases. kmap() was not intended for long term mappings but it has morphed in that direction and its use is strongly discouraged in newer code and the set of the preceding functions should be preferred.

  On 64-bit systems, calls to kmap_local_page(), kmap_atomic() and kmap() have no real work to do because a 64-bit address space is more than sufficient to address all the physical memory whose pages are permanently mapped.

• vmap(). This can be used to make a long duration mapping of multiple physical pages into a contiguous virtual space. It needs global synchronization to unmap.

Cost of Temporary Mappings

The cost of creating temporary mappings can be quite high. The arch has to manipulate the kernel's page tables, the data TLB and/or the MMU's registers.

If CONFIG_HIGHMEM is not set, then the kernel will try and create a mapping simply with a bit of arithmetic that will convert the page struct address into a pointer to the page contents rather than juggling mappings about. In such a case, the unmap operation may be a null operation.

If CONFIG_MMU is not set, then there can be no temporary mappings and no highmem. In such a case, the arithmetic approach will also be used.

i386 PAE

The i386 arch, under some circumstances, will permit you to stick up to 64GiB of RAM into your 32-bit machine. This has a number of consequences:

• Linux needs a page-frame structure for each page in the system and the pageframes need to live in the permanent mapping, which means:

• you can have 896M/sizeof(struct page) page-frames at most; with struct page being 32-bytes that would end up being something in the order of 112G worth of pages; the kernel, however, needs to store more than just page-frames in that memory...

• PAE makes your page tables larger - which slows the system down as more data has to be accessed to traverse in TLB fills and the like. One advantage is that PAE has more PTE bits and can provide advanced features like NX and PAT.

The general recommendation is that you don't use more than 8GiB on a 32-bit machine - although more might work for you and your workload, you're pretty much on your own - don't expect kernel developers to really care much if things come apart.

Functions

void *kmap(struct page *page)

Map a page for long term usage

Parameters

struct page *page

Pointer to the page to be mapped

Return

The virtual address of the mapping

Description

Can only be invoked from preemptible task context because on 32bit systems with CONFIG_HIGHMEM enabled this function might sleep.

For systems with CONFIG_HIGHMEM=n and for pages in the low memory area this returns the virtual address of the direct kernel mapping.

The returned virtual address is globally visible and valid up to the point where it is unmapped via kunmap(). The pointer can be handed to other contexts.

For highmem pages on 32bit systems this can be slow as the mapping space is limited and protected by a global lock. In case that there is no mapping slot available the function blocks until a slot is released via kunmap().

void kunmap(struct page *page)

Unmap the virtual address mapped by kmap()

Parameters

struct page *page

Pointer to the page which was mapped by kmap()

Description

Counterpart to kmap(). A NOOP for CONFIG_HIGHMEM=n and for mappings of pages in the low memory area.

struct page *kmap_to_page(void *addr)

Get the page for a kmap'ed address

Parameters

void *addr

The address to look up

Return

The page which is mapped to addr.

void kmap_flush_unused(void)

Flush all unused kmap mappings in order to remove stray mappings

Parameters

void

no arguments

void *kmap_local_page(struct page *page)

Map a page for temporary usage

Parameters

struct page *page

Pointer to the page to be mapped

Return

The virtual address of the mapping

Description

Can be invoked from any context, including interrupts.

Requires careful handling when nesting multiple mappings because the map management is stack based. The unmap has to be in the reverse order of the map operation:

addr1 = kmap_local_page(page1); addr2 = kmap_local_page(page2); ... kunmap_local(addr2); kunmap_local(addr1);

Unmapping addr1 before addr2 is invalid and causes malfunction.

Contrary to kmap() mappings the mapping is only valid in the context of the caller and cannot be handed to other contexts.

On CONFIG_HIGHMEM=n kernels and for low memory pages this returns the virtual address of the direct mapping. Only real highmem pages are temporarily mapped.

While kmap_local_page() is significantly faster than kmap() for the highmem case it comes with restrictions about the pointer validity.

On HIGHMEM enabled systems mapping a highmem page has the side effect of disabling migration in order to keep the virtual address stable across preemption. No caller of kmap_local_page() can rely on this side effect.

void *kmap_local_folio(struct folio *folio, size_t offset)

Map a page in this folio for temporary usage

Parameters

struct folio *folio

The folio containing the page.

size_t offset

The byte offset within the folio which identifies the page.

Description

Requires careful handling when nesting multiple mappings because the map management is stack based. The unmap has to be in the reverse order of the map operation:

addr1 = kmap_local_folio(folio1, offset1);
addr2 = kmap_local_folio(folio2, offset2);
...
kunmap_local(addr2);
kunmap_local(addr1);

Unmapping addr1 before addr2 is invalid and causes malfunction.

Contrary to kmap() mappings the mapping is only valid in the context of the caller and cannot be handed to other contexts.

On CONFIG_HIGHMEM=n kernels and for low memory pages this returns the virtual address of the direct mapping. Only real highmem pages are temporarily mapped.

While it is significantly faster than kmap() for the highmem case it comes with restrictions about the pointer validity.

On HIGHMEM enabled systems mapping a highmem page has the side effect of disabling migration in order to keep the virtual address stable across preemption. No caller of kmap_local_folio() can rely on this side effect.

Context

Can be invoked from any context.

Return

The virtual address of offset.

void *kmap_atomic(struct page *page)

Atomically map a page for temporary usage - Deprecated!

Parameters

struct page *page

Pointer to the page to be mapped

Return

The virtual address of the mapping

Description

In fact a wrapper around kmap_local_page() which also disables pagefaults and, depending on PREEMPT_RT configuration, also CPU migration and preemption. Therefore users should not count on the latter two side effects.

Mappings should always be released by kunmap_atomic().

Do not use in new code. Use kmap_local_page() instead.

It is used in atomic context when code wants to access the contents of a page that might be allocated from high memory (see __GFP_HIGHMEM), for example a page in the pagecache. The API has two functions, and they can be used in a manner similar to the following:

// Find the page of interest.
struct page *page = find_get_page(mapping, offset);

// Gain access to the contents of that page.
void *vaddr = kmap_atomic(page);

// Do something to the contents of that page.
memset(vaddr, 0, PAGE_SIZE);

// Unmap that page.
kunmap_atomic(vaddr);

Note that the kunmap_atomic() call takes the result of the kmap_atomic() call, not the argument.

If you need to map two pages because you want to copy from one page to another you need to keep the kmap_atomic calls strictly nested, like:

vaddr1 = kmap_atomic(page1); vaddr2 = kmap_atomic(page2);

memcpy(vaddr1, vaddr2, PAGE_SIZE);

kunmap_atomic(vaddr2); kunmap_atomic(vaddr1);

struct folio *vma_alloc_zeroed_movable_folio(struct vm_area_struct *vma, unsigned long vaddr)

Allocate a zeroed page for a VMA.

Parameters

struct vm_area_struct *vma

The VMA the page is to be allocated for.

unsigned long vaddr

The virtual address the page will be inserted into.

Description

This function will allocate a page suitable for inserting into this VMA at this virtual address. It may be allocated from highmem or the movable zone. An architecture may provide its own implementation.

Return

A folio containing one allocated and zeroed page or NULL if we are out of memory.

size_t memcpy_from_file_folio(char *to, struct folio *folio, loff_t pos, size_t len)

Copy some bytes from a file folio.

Parameters

char *to

The destination buffer.

struct folio *folio

The folio to copy from.

loff_t pos

The position in the file.

size_t len

The maximum number of bytes to copy.

Description

Copy up to len bytes from this folio. This may be limited by PAGE_SIZE if the folio comes from HIGHMEM, and by the size of the folio.

Return

The number of bytes copied from the folio.

void folio_zero_segments(struct folio *folio, size_t start1, size_t xend1, size_t start2, size_t xend2)

Zero two byte ranges in a folio.

Parameters

struct folio *folio

The folio to write to.

size_t start1

The first byte to zero.

size_t xend1

One more than the last byte in the first range.

size_t start2

The first byte to zero in the second range.

size_t xend2

One more than the last byte in the second range.

void folio_zero_segment(struct folio *folio, size_t start, size_t xend)

Zero a byte range in a folio.

Parameters

struct folio *folio

The folio to write to.

size_t start

The first byte to zero.

size_t xend

One more than the last byte to zero.

void folio_zero_range(struct folio *folio, size_t start, size_t length)

Zero a byte range in a folio.

Parameters

struct folio *folio

The folio to write to.

size_t start

The first byte to zero.

size_t length

The number of bytes to zero.

void *kmap_high(struct page *page)

map a highmem page into memory

Parameters

struct page *page

struct page to map

Description

Returns the page's virtual memory address.

We cannot call this from interrupts, as it may block.

void *kmap_high_get(struct page *page)

pin a highmem page into memory

Parameters

struct page *page

struct page to pin

Description

Returns the page's current virtual memory address, or NULL if no mapping exists. If and only if a non null address is returned then a matching call to kunmap_high() is necessary.

This can be called from any context.

void kunmap_high(struct page *page)

unmap a highmem page into memory

Parameters

struct page *page

struct page to unmap

Description

If ARCH_NEEDS_KMAP_HIGH_GET is not defined then this may be called only from user context.

void *page_address(const struct page *page)

get the mapped virtual address of a page

Parameters

const struct page *page

struct page to get the virtual address of

Description

Returns the page's virtual address.

void set_page_address(struct page *page, void *virtual)

set a page's virtual address

Parameters

struct page *page

struct page to set

void *virtual

virtual address to use

kunmap_atomic

kunmap_atomic (__addr)

Unmap the virtual address mapped by kmap_atomic() - deprecated!

Parameters

__addr

Virtual address to be unmapped

Description

Unmaps an address previously mapped by kmap_atomic() and re-enables pagefaults. Depending on PREEMP_RT configuration, re-enables also migration and preemption. Users should not count on these side effects.

Mappings should be unmapped in the reverse order that they were mapped. See kmap_local_page() for details on nesting.

__addr can be any address within the mapped page, so there is no need to subtract any offset that has been added. In contrast to kunmap(), this function takes the address returned from kmap_atomic(), not the page passed to it. The compiler will warn you if you pass the page.

kunmap_local

kunmap_local (__addr)

Unmap a page mapped via kmap_local_page().

Parameters

__addr

An address within the page mapped

Description

__addr can be any address within the mapped page. Commonly it is the address return from kmap_local_page(), but it can also include offsets.

Unmapping should be done in the reverse order of the mapping. See kmap_local_page() for details.